Lindy 10m USB 3.0 Active Extension Pro Hub
Lindy 10m USB 3.0 Active Extension Pro Hub. Images for illustration purposes only. The Lindy USB Active Extension Hub Pro is a high-performance hub with active cable that allows access to four USB 3.0 SuperSpeed peripherals over long distances. With support for data transfer speeds of up to 5Gbps this extension hub is perfect for transferring large data volumes quickly and reliably. This hub features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments.
This 10m extension hub can be used on its own or as part of the Lindy USB 3.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and this Active Extension Pro hub. It enables the distribution of USB signals to up to 4 devices at distances of up to 40m (depending on the cable configurations used). Using this hub as part of the USB 3.0 Active Extension System Pro If you would like to use this hub as part of combined Lindy USB 3.0 Active Extension System Pro installation, please note the requirements below.
This Active Extension Hub Pro must be installed as the final part of the extension system. The first unit connected to your computer must always be the USB 3.0 Active Extension Pro 8m No. Once the first cable is connected, you can cascade additional Extension System Pro cables to extend the distance up to a maximum of 40m. The final part of the extension can be any cable or hub from the Extension System Pro range. If you need to extend multiple devices or connect a USB device with high power requirements, you should use the 10m Hub Pro unit with its power supply as the final part of the extension.Information about USB 3.0, 3.1 and 3.2 USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface. USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps. USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps.
Can be used standalone or as part of the Lindy Active Extension System Pro to create bespoke extension systems of over 40m (depending on the cable configurations used). Connects to the deviceandrsquo;s existing USB cable (2m maximum).High performance hub with active cable that provides an extended 10m connection between a computer and up to 4 USB 3.0 devices. Supports the full USB 3.0 SuperSpeed bandwidth for speeds of 5Gbps. The protective layer for the cable, typically made of plastic.
CE, UKCA, FCC, RoHS, REACH, California Proposition 65. 0.064MHz - 0.08dB 0.256MHz - 0.11dB 0.512MHz - 0.13dB 0.772MHz - 0.15dB 1.0MHz - 0.20dB 4MHz - 0.39dB 8MHz - 0.57dB 12MHz - 0.67dB 24MHz - 0.95dB 48MHz - 1.35dB 96MHz - 1.90dB 200MHz - 3.20dB 400MHz - 5.80dB. Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration. What the connector contacts are covered with (layer on top).The distance from one side of the cable to the other, with a straight line going through the middle of the cable. How long the cable is. Rate at which data can be transferred, usually measured in units per second. May vary with network configurations. The minimum and maximum temperatures at which the product can be safely operated.
The type of product package e. Weight of the packaged product. The distance from the top to the bottom of the packaging. The distance from the front to the back of the packaging. The distance from one side of the packaging to the other. The amount in each pack. The socket/plug where the DC electricity supply connects to the device. USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity. A hub is a device for connecting multiple devices together. The hub interface is where the hub connects to other devices via input/output (I/O) ports. USB 3.2 Gen 1 (3.1 Gen 1) Type-A. Interface that enables a host controller to communicate with a driver. The number of ports or external interfaces to which other equipment can be connected. 15 x 42 x 8 mm. Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. The measurement of the product from head to foot or from base to top. The distance from the front to the back of something. The measurement or extent of something from side to side.